Minimize sampling jitter

[jarek556]

What is the best way to get stable sampling rate ? Can I use external clock providing directly sampling frequency, i.e 30.72MHz ?

[robert.ghilduta]

For a discussion on fundamental clock inputs and reference clocks, please take a look at https://www.nuand.com/frequently-asked- ... _reference . Basically the bladeRF 1.0 and bladeRF 2.0 should be able to take a certain kind of 38.4MHz as a fundamental clock input, and also the bladeRF 2.0 micro has an on-board ADF4002 PLL that can take the on-board 38.4MHz clock given a 10MHz reference.