But I am having trobbels with it. First to make clear I am working on both windows 10 as on Linux (ubuntu 14.04 LTS). For the software I use is GNU radio Companion (3.7.13.5 for windows and 3.7.9.2 for Linux).
For using the xb200 I used the starter guide on github :https://github.com/Nuand/bladeRF/wiki/G ... rter-Board
But I can't realy make sense of it and they don't say how to work with a custom filter(or not in a way I can understand).
So here are my problems/questions
:1) If I want to "run" the bladeRF on the windows version it doesn't work even tough I filled the serial nr. in the osmocom block in.
2) How do I connect all the SMA cables on the xb200 module for the custom filter?
3) How do I make a custom filter and how do I run this custom filter?
4) Can the bladeRF transmit and receive at the same time?
5) Does anyone know how I update the gnuradio version on linux. I used the commands "sudo apt-get update" and "sudo apt-get install gnuradio" and it still doen't work.
So if anyone can help me I would be very grateful