BladeRF 2.0 with YateBTS
Posted: Wed Feb 06, 2019 2:45 am
Hey Guys,
I need your assistance. We bought the BladeRF 2.0 A9 for our Lab for a IoT Pentest Setup with YateBTS.
We followed strictly the Information from this thread viewtopic.php?f=5&t=5094#p9358 but never got one of our iphones connected. We can see the network but a connection attemp fails. After several recompiling of yate, libs and test with different fx3 and fpgas - we have no clue.
The attached logfile was created with "-vvvv" and this version:
bladeRF> version
bladeRF-cli version: 1.7.0-git-6b659c2d
libbladeRF version: 2.1.0-git-6b659c2d
Firmware version: 2.2.0-git-3d38fac2
FPGA version: 0.8.0
The system is a Ubuntu 18.04 build on bare metal - no virtualization involved.
https://ufile.io/klvj4
Thanks for your assistance!
I need your assistance. We bought the BladeRF 2.0 A9 for our Lab for a IoT Pentest Setup with YateBTS.
We followed strictly the Information from this thread viewtopic.php?f=5&t=5094#p9358 but never got one of our iphones connected. We can see the network but a connection attemp fails. After several recompiling of yate, libs and test with different fx3 and fpgas - we have no clue.
The attached logfile was created with "-vvvv" and this version:
bladeRF> version
bladeRF-cli version: 1.7.0-git-6b659c2d
libbladeRF version: 2.1.0-git-6b659c2d
Firmware version: 2.2.0-git-3d38fac2
FPGA version: 0.8.0
The system is a Ubuntu 18.04 build on bare metal - no virtualization involved.
https://ufile.io/klvj4
Thanks for your assistance!