After realizing that osmocom source was not finding the bladerf=0 instance, I trapped the real error:
FATAL: [bladeRF source] Failed to open bladeRF device *:instance=0
Does anyone know why osmocom source cannot find the sdr bladerf?
bladeRF-cli runs fine. It sees the bladerf sdr, and I can read the configuration.
I get the same error when I run osmocom_fft. I built gnuradio on another machine with the latest version of gnuradio (3.7.13.4), and it has the same problem.
Regards,
Keith
FATAL: [bladeRF source] Failed to open bladeRF device *:instance=0
-
- Posts: 3
- Joined: Mon Jan 28, 2019 4:33 pm
-
- Posts: 19
- Joined: Sun Dec 09, 2018 3:02 pm
Re: FATAL: [bladeRF source] Failed to open bladeRF device *:instance=0
HI,
did you use pyBOMBS to instal gnuradio? try to rebuild gr-osmosdr (only)
b.r.
did you use pyBOMBS to instal gnuradio? try to rebuild gr-osmosdr (only)
b.r.