Trying to run the build shell i recieve the following. Do i have some directory mismatch? Running Ubuntu14.04
greg@greg-HP-Pavilion-dv7-Notebook-PC:~/bladeRF/hdl/quartus$ ./build_bladerf.sh -r hosted -s 115
##########################################################################
Generating NIOS II Qsys for bladeRF ...
##########################################################################
./build_bladerf.sh: line 121: ip-generate: command not found
Build issues with build_sh
-
- Posts: 10
- Joined: Sun Apr 20, 2014 8:22 am
Re: Build issues with build_sh
Ok i realized this issue was due to not being inside the nios shell. After getting into the appropriae shell it kicked off but i was left at
INFO: Finished initializing SOPC project local software IP. Total time taken = 2 seconds
INFO: Searching for BSP components with category: driver_element
INFO: Searching for BSP components with category: software_package_element
SEVERE: /home/greg/altera/13.1/quartus/linux/jre/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
SEVERE: nios2-bsp-generate-files failed.
Any thoughts?
INFO: Finished initializing SOPC project local software IP. Total time taken = 2 seconds
INFO: Searching for BSP components with category: driver_element
INFO: Searching for BSP components with category: software_package_element
SEVERE: /home/greg/altera/13.1/quartus/linux/jre/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
SEVERE: nios2-bsp-generate-files failed.
Any thoughts?
-
- Posts: 10
- Joined: Sun Apr 20, 2014 8:22 am
Re: Build issues with build_sh
Solved...incase any linux "aces" like myself run into this issue
sudo apt-get install libxtst6:i386
sudo apt-get install libxtst6:i386