hi everyone
i have a usb3 expresscard on my laptop
when i connect my bladerf to expresscard usb3 port windows recognize it but bladerf-cli dont show any device.
my expresscard host controller is NEC.
i have windows 7 64 bit
my bladerf work well on usb2.
problem with usb3 expresscard
-
- Posts: 11
- Joined: Tue Feb 04, 2014 2:43 pm
Re: problem with usb3 expresscard
Hello,
I'm also planning to order usb3 expresscard for my "old" laptop in order to use bladerf for higher data transfers (wider spectrum).
The express card whcih I'm interesed is with NEC D720200 chipset since in the working configurations have found a case with Onboard NEC uPD720200 xHCI controller or chipset. (https://github.com/Nuand/bladeRF/wiki/Troubleshooting)
Could you tell me which NEC chipset has your express card?
Anybody has experience with usb3 express card and bladerf?
BR,
Blagoja
I'm also planning to order usb3 expresscard for my "old" laptop in order to use bladerf for higher data transfers (wider spectrum).
The express card whcih I'm interesed is with NEC D720200 chipset since in the working configurations have found a case with Onboard NEC uPD720200 xHCI controller or chipset. (https://github.com/Nuand/bladeRF/wiki/Troubleshooting)
Could you tell me which NEC chipset has your express card?
Anybody has experience with usb3 express card and bladerf?
BR,
Blagoja
-
- Posts: 5
- Joined: Mon Feb 10, 2014 12:39 am
Re: problem with usb3 expresscard
my model is of soyntec
http://www.soyntec.com/item/77666
http://www.soyntec.com/item/77666
-
- Posts: 455
- Joined: Thu Jun 06, 2013 8:15 pm
Re: problem with usb3 expresscard
I suspect that the underlying problem is that libusb isn't seeing the device. You can verify this by running the listdevs.exe program that's included in the libusb binary distribution (under examples/bin64). If this doesn't show your device, my above guess is correct. If this lists your device, but bladeRF-cli does not...then the problem lies in our code. In this case, keep us posted and we'll dig further.
If it ends up being the case that libusb isn't seeing devices attached to your express card, you might want to look over the libusb mailing list and issue tracker to see if there's any known workarounds.
LazyDodo is working on a native Windows backend, so hopefully we'll have that merged into master within a few weeks. I suspect you'll have more luck with that once we get his code integrated into the libbladeRF mainline.
If it ends up being the case that libusb isn't seeing devices attached to your express card, you might want to look over the libusb mailing list and issue tracker to see if there's any known workarounds.
LazyDodo is working on a native Windows backend, so hopefully we'll have that merged into master within a few weeks. I suspect you'll have more luck with that once we get his code integrated into the libbladeRF mainline.
-
- Posts: 455
- Joined: Thu Jun 06, 2013 8:15 pm
Re: problem with usb3 expresscard
Just another thought -- I see that card has/requires external DC power. Are you supplying power to that?
You could also try powering the bladeRF from the DC barrel jack rather than from USB (check jumper J70 on the schematic) and see if that resolves any issues.
You could also try powering the bladeRF from the DC barrel jack rather than from USB (check jumper J70 on the schematic) and see if that resolves any issues.
-
- Posts: 5
- Joined: Mon Feb 10, 2014 12:39 am
Re: problem with usb3 expresscard
listdevs.exe doesnt show my device so your guess is correct and problem lies on libusb
thanks
thanks