Official bladeRF forum


https://www.nuand.com/forums/

MatLab or LabVIEW drivers?

https://www.nuand.com/forums/viewtopic.php?t=3521

Page 1 of 1

MatLab or LabVIEW drivers?

Posted: Sat Jan 18, 2014 5:29 pm
by Montezuma
Are there any experimental or "alpha"/"beta" drivers for either MatLab, or LabVIEW?

Re: MatLab or LabVIEW drivers?

Posted: Thu Feb 27, 2014 8:21 am
by mobius
have a pre-release. not supported by all the functionality. http://nuand.com/downloads/matlab.tar.gz
it has errors in piping mex functions. I've tried it, after correcting errors I made ​​it. I managed to gain, bandwidth, frequency, and received I / Q data.

Re: MatLab or LabVIEW drivers?

Posted: Fri Mar 28, 2014 2:00 am
by yvesined
Hello,

I downloaded the matlab toolbox you referenced above and tried to compile it with Matlab 2011a executing compile.m and it didn't work:

lcc preprocessor error: bladerf_calibrate_dc.c:4 Could not find include file "libbladeRF.h"

Well I searched for that header and found it in the repository and added it to the building path and compiled again:

lcc preprocessor error: .\libbladeRF.h:25 bladerf_calibrate_dc.c:4 Could not find include file <stdint.h>
lcc preprocessor error: .\stdbool.h:5 .\libbladeRF.h:26 bladerf_calibrate_dc.c:4 Macro redefinition of true
lcc preprocessor error: .\stdbool.h:6 .\libbladeRF.h:26 bladerf_calibrate_dc.c:4 Macro redefinition of false

I would really like to use this toolbox, so could you provide a manual and all necessary libraries/headers to compile and use this toolbox with Matlab/Simulink.

Thanks,

Denis.

Re: MatLab or LabVIEW drivers?

Posted: Mon Mar 31, 2014 2:14 am
by robert.ghilduta
The Matlab files still need to get cleaned up. yvesined, you are on the right track with copying the appropriate libbladeRF.h file to the direction if the compiler can't find it. Is there anyway you can use MSVC as the compiler? If not let me know and I'll try to see I can do with lcc.

Re: MatLab or LabVIEW drivers?

Posted: Thu Apr 10, 2014 1:37 am
by yvesined
By now this is no problem anymore as Rob has created a new revised repo for Matlab support: https://github.com/Nuand/bladeRF-matlab
Thank you! :P

Re: MatLab or LabVIEW drivers?

Posted: Fri Apr 11, 2014 8:22 am
by Antti
Is Matlab driver for osx compatible?

Re: MatLab or LabVIEW drivers?

Posted: Mon May 05, 2014 5:52 pm
by robert.ghilduta
Antti,
I think compile.m should work on Mac as well. Maybe some of the paths are different?
What sort of error messages are you seeing?

Re: MatLab or LabVIEW drivers?

Posted: Wed May 07, 2014 11:00 pm
by yoshimifuj
Do I need MatLab compiler to use the MatLab driver?
Because the driver is uploaded as source code.
I don't have any MatLab compiler licence.
Is the pre-compiled version of the driver available?

Re: MatLab or LabVIEW drivers?

Posted: Thu May 08, 2014 3:27 am
by yoshimifuj
Just to build MatLab interface, I'm not required to have MatLab compiler.
I just installed VisualStudio 2013 Professional.
However, the compiler detect an error says:

C:\Projects\RRP\bladeRF-matlab\bladerf_fw_version.c(19) : error C2120: void 型が他の型と同時に使われました。

The error message in Japanese means "the function return value seems to be void."
Do you have any suggestion to avoid this error?

Re: MatLab or LabVIEW drivers?

Posted: Thu May 08, 2014 9:11 pm
by yoshimifuj
Hello,
I downloaded, extracted matlab.tar.gz into a folder and copyed libbladeRF.h and bladeRF.lib to the folder.
Compilation finished successfully!

Thanks.

Re: MatLab or LabVIEW drivers?

Posted: Fri May 09, 2014 1:42 am
by robert.ghilduta
Hi Yoshimi,

There's more up to date code in https://github.com/Nuand/bladeRF-matlab . The Github branch is where all of the active development is happening.

Re: MatLab or LabVIEW drivers?

Posted: Fri May 09, 2014 9:57 am
by Antti
robert.ghilduta wrote:Antti,
I think compile.m should work on Mac as well. Maybe some of the paths are different?
What sort of error messages are you seeing?
Hi, this is what i get:
>> version

ans =

8.3.0.532 (R2014a)

>> compile

BLADERF_PATH =

/opt/local/include/


ARCH =

x86

Building with 'Xcode with Clang'.
/Users/xxx/Documents/MATLAB/bladeRF-matlab/bladerf_calibrate_dc.c:21:8: warning: implicit conversion from enumeration type 'bladerf_module' to different enumeration type 'bladerf_cal_module' [-Wenum-conversion]
mod = (bladerf_module)(*m_ptr);
~ ^~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.

Error using mex
ld: warning: directory not found for option '-L/opt/local/include/libx86'
ld: warning: directory not found for option '-L/opt/local/include/x86'
ld: library not found for -lbladeRF
clang: error: linker command failed with exit code 1 (use -v to see invocation)


Error in compile (line 16)
eval(sprintf('mex bladerf_%s.c -I''%s\\include'' -Iinclude -L''%s\\lib\\%s'' -L''%s\\%s'' -lbladeRF', char(src(i)),
BLADERF_PATH, BLADERF_PATH, ARCH, BLADERF_PATH, ARCH))

>>

Re: MatLab or LabVIEW drivers?

Posted: Fri Jul 04, 2014 2:36 am
by kkao
Hello,
I'm trying to compile the Matlab interface using source codes from git and tar file on Ubuntu 14.04.
http://nuand.com/downloads/matlab.tar.gz
https://github.com/Nuand/bladeRF-matlab

I modified only the following.
The version of gcc installed on Ubuntu 14.04 is 4.8, but Matlab supports only gcc 4.7, so I installed gcc 4.7.
The compile.m file we can get from git seems to support only Windows OS, so I used compile.m from the tar file as well even when compiling files from git.

Both of them caused some errors in the middle of compiling.
Do these errors mean mismatch of the version between the Matlab interface and the driver of bladeRF?
Would you give me some advice?

- files extracted from the tar file

Code: Select all

>> run compile
Building with 'gcc'.
MEX completed successfully.
Building with 'gcc'.
/home/xxx/Downloads/bladeRF_matlab/bladerf_close.c: In function ‘mexFunction’:
/home/xxx/Downloads/bladeRF_matlab/bladerf_close.c:16:6: warning: assignment makes pointer from integer without a cast [enabled by default]

MEX completed successfully.
Building with 'gcc'.
MEX completed successfully.
Building with 'gcc'.
/home/xxx/Downloads/bladeRF_matlab/bladerf_fw_version.c: In function ‘mexFunction’:
/home/xxx/Downloads/bladeRF_matlab/bladerf_fw_version.c:19:6: warning: assignment makes pointer from integer without a cast [enabled by default]

MEX completed successfully.
Building with 'gcc'.
MEX completed successfully.
Building with 'gcc'.
MEX completed successfully.
Building with 'gcc'.
/home/xxx/Downloads/bladeRF_matlab/bladerf_get_lna_gain.c: In function ‘mexFunction’:
/home/xxx/Downloads/bladeRF_matlab/bladerf_get_lna_gain.c:20:5: warning: passing argument 2 of ‘bladerf_get_lna_gain’ from incompatible pointer type [enabled by default]
In file included from /home/xxx/Downloads/bladeRF_matlab/bladerf_get_lna_gain.c:4:0:
/usr/local/include/libbladeRF.h:806:15: note: expected ‘enum bladerf_lna_gain *’ but argument is of type ‘int *’

MEX completed successfully.
Building with 'gcc'.
MEX completed successfully.
Building with 'gcc'.
MEX completed successfully.
Building with 'gcc'.
MEX completed successfully.
Building with 'gcc'.
MEX completed successfully.
Building with 'gcc'.
MEX completed successfully.
Building with 'gcc'.
MEX completed successfully.
Building with 'gcc'.
MEX completed successfully.
Building with 'gcc'.
/home/xxx/Downloads/bladeRF_matlab/bladerf_open.c: In function ‘mexFunction’:
/home/xxx/Downloads/bladeRF_matlab/bladerf_open.c:18:7: warning: assignment makes integer from pointer without a cast [enabled by default]

MEX completed successfully.
Building with 'gcc'.
Error using mex
/tmp/mex_25669251627649_7795/bladerf_rx.o: In function `mexFunction':
bladerf_rx.c:(.text+0x96): undefined reference to `bladerf_rx'
collect2: error: ld returned 1 exit status


Error in compile (line 16)
mex bladerf_rx.c -L. -lbladeRF

Error in run (line 63)
evalin('caller', [script ';']);
- files from git

Code: Select all

>> run compile
Building with 'gcc'.
MEX completed successfully.
Building with 'gcc'.
/home/xxx/Downloads/bladeRF_matlab_git/bladerf_close.c: In function ‘mexFunction’:
/home/xxx/Downloads/bladeRF_matlab_git/bladerf_close.c:16:6: warning: assignment makes pointer from integer without a cast [enabled by default]

MEX completed successfully.
Building with 'gcc'.
MEX completed successfully.
Building with 'gcc'.
Error using mex
/home/xxx/Downloads/bladeRF_matlab_git/bladerf_fw_version.c: In function ‘mexFunction’:
/home/xxx/Downloads/bladeRF_matlab_git/bladerf_fw_version.c:18:6: warning: assignment makes pointer from integer
without a cast [enabled by default]
/home/xxx/Downloads/bladeRF_matlab_git/bladerf_fw_version.c:19:2: warning: passing argument 1 of ‘bladerf_version’
from incompatible pointer type [enabled by default]
In file included from /home/xxx/Downloads/bladeRF_matlab_git/bladerf_fw_version.c:4:0:
/usr/local/include/libbladeRF.h:1944:16: note: expected ‘struct bladerf_version *’ but argument is of type ‘struct
bladerf *’
/home/xxx/Downloads/bladeRF_matlab_git/bladerf_fw_version.c:19:2: error: too many arguments to function
‘bladerf_version’
In file included from /home/xxx/Downloads/bladeRF_matlab_git/bladerf_fw_version.c:4:0:
/usr/local/include/libbladeRF.h:1944:16: note: declared here
/home/xxx/Downloads/bladeRF_matlab_git/bladerf_fw_version.c:19:6: error: void value not ignored as it ought to be


Error in compile (line 4)
mex bladerf_fw_version.c -L. -lbladeRF

Error in run (line 63)
evalin('caller', [script ';']);

Re: MatLab or LabVIEW drivers?

Posted: Fri Jul 04, 2014 6:53 am
by bpadalino
What this looks like is that the MATLAB driver has suffered a bit of rot in terms of the libbladeRF API and is trying to use functions which don't exist anymore.

I have just posted the issue to github to mark it down that we need to address this issue.

Currently we're on a push to get a stable library built up with a stable API so this won't happen again, so pull requests are welcome when it comes to modernizing the MATLAB driver for the current/more stable API. Also note that using the synchronous interface is probably the better way to get samples in/out of the device.

Sorry for the inconvenience.

Re: MatLab or LabVIEW drivers?

Posted: Mon Aug 11, 2014 11:31 pm
by kkao
Thank you for your reply. Sorry my reply is late.
I suppose you may be adapting the matlab Interface to the latest driver.
As far as I can see, the current matlab interface does not include any functions for transmitting.
I'd like the matlab interface by which we can transmit and receive simultaneously. Are you currently making such an interface?
If the next version of matlab interface that can transmit will be released soon, I'd like to use it.
However, I'm trying to make a matlab interface using the following sample codes which are written in C in case it will take a little more time to be released.
https://github.com/Nuand/bladeRF/tree/0 ... t_sync/src

If some threads for transmitting and receiving process can be spawned by a mex-file like the sample codes, I think I can transmit and receive at the same time without consideration on the timing of transmitting or receiving at the invoker side, i.e. m-file.
Is it possible to make such a mex-file? Would you give me any advice if you already have some experience?
All times are UTC-07:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited