Hello. My bladeRF2.0 worked perfectly but I wanted to have 100 Msps of sample rate, therefore I tried to update the FPGA version to achieve it. But I don't know what I made that now when I try to run the osmocom source with my device in GNUradio, or simply launch the bladeRF from terminal, an error is shown:
"RuntimeError: set_sample_rate: Failed to set sample rate: An unexpected error occurred (-1)"
and I don't know how to fix it.
Thanks
Failed to set sample rate
-
lezard
- Posts: 4
- Joined: Wed Sep 27, 2023 10:02 am
Re: Failed to set sample rate
Are you using the osmosdr from https://github.com/Nuand/gr-osmosdr ?
-
pablomuo
- Posts: 3
- Joined: Fri Sep 29, 2023 1:23 am
Re: Failed to set sample rate
Fixed, I had to update the firmware. Thanks!
-
leaveplant
- Posts: 1
- Joined: Wed Jan 31, 2024 2:03 am
Re: Failed to set sample rate
It seems like there might have been an issue with updating the FPGA version of your bladeRF2.0. The error you're encountering suggests a problem with setting the sample rate. Try reverting to the previous FPGA version or re-installing the firmware
run 3
run 3