Generate BSP errors
Posted: Tue Sep 19, 2023 11:22 am
Hello all,
I was trying to measure the code execution time inside of the Nios II, thus an "interval timer" peripheral could be necessary to do this. Therefore, I recently added an "interval timer" inside of the Nios II system, and this hence lead to some changes upon the corresponding .sopcinfo and .qsys files. The FPGA was compiled successfully, but files in bladerf_nios_bsp were not updated, and I tried to generate a new BSP regarding the changes in Nios II via Nios II Eclipse SBT, but Eclipse showed me an error message:
Error executing 'nios2-bsp-generate-files --bsp-dir . --settings settings.bsp', unexpected return code 1.
Error message:
SEVERE: settings.bsp
SEVERE: nios2-bsp-generate-files failed.
The board I am currently using is: BladeRF2.0 Micro- XA4; OS of the PC: Windows 11. Software versions: Quartus Prime 17.1 and its built-in Eclipse for Nios II SBT.
Are there anything wrong I did during building the FPGA? Can anyone help? Many thanks in advance.
I was trying to measure the code execution time inside of the Nios II, thus an "interval timer" peripheral could be necessary to do this. Therefore, I recently added an "interval timer" inside of the Nios II system, and this hence lead to some changes upon the corresponding .sopcinfo and .qsys files. The FPGA was compiled successfully, but files in bladerf_nios_bsp were not updated, and I tried to generate a new BSP regarding the changes in Nios II via Nios II Eclipse SBT, but Eclipse showed me an error message:
Error executing 'nios2-bsp-generate-files --bsp-dir . --settings settings.bsp', unexpected return code 1.
Error message:
SEVERE: settings.bsp
SEVERE: nios2-bsp-generate-files failed.
The board I am currently using is: BladeRF2.0 Micro- XA4; OS of the PC: Windows 11. Software versions: Quartus Prime 17.1 and its built-in Eclipse for Nios II SBT.
Are there anything wrong I did during building the FPGA? Can anyone help? Many thanks in advance.