Official bladeRF forum

Posted: **Tue May 30, 2023 4:37 pm**

When I do

bladerf-cli -l ./hostedxA9-latest.rbf

I see an output of

[WARNING @ /privatehost/libraries/libbladeRF/src/board/bladerf2/bladerf2.c:165] FPGA v0.15.0 was detected, which requires firmware v2.5.0 or later. The device firmware is currently v2.4.0. Please upgrade the device firmware before continuing.

But when I go to https://www.nuand.com/fx3_images/ there is no 2.5.0 available. I guessed that perhaps bladeRF_fw_latest.img was secretly 2.5.0, but this doesn't seem to be the case. Where can I find the latest firmware so I can use the latest FPGA bitstream?

Posted: **Mon Jun 19, 2023 5:41 am**

Apologies, this was a temporary fluke in release files. Please update to latest libbladeRF!

Posted: **Sun Mar 24, 2024 11:47 pm**

There's nothing to worry about, your mission is to do your bestTomb of the Mask!

Posted: **Sun Apr 21, 2024 8:10 pm**

Based on the provided information, it appears that the latest available firmware on the Nuand website (https://www.nuand.com/fx3_images/) is version 2.4.0tunnel rush. However, the output from your command indicates that you require firmware version 2.5.0 or later for the FPGA bitstream you are trying to use.

Official bladeRF forum

"FPGA v0.15.0 was detected, which requires firmware v2.5.0 or later" (but no 2.5.0 available?)

"FPGA v0.15.0 was detected, which requires firmware v2.5.0 or later" (but no 2.5.0 available?)

Re: "FPGA v0.15.0 was detected, which requires firmware v2.5.0 or later" (but no 2.5.0 available?)

Re: "FPGA v0.15.0 was detected, which requires firmware v2.5.0 or later" (but no 2.5.0 available?)

Re: "FPGA v0.15.0 was detected, which requires firmware v2.5.0 or later" (but no 2.5.0 available?)