![Confused :?](./images/smilies/icon_e_confused.gif)
FSK modulation and demodulation
-
- Posts: 5
- Joined: Sat Oct 08, 2022 6:53 pm
FSK modulation and demodulation
Hello, I found the HDL file of FSK modulation and demodulation in the folder, how can I add it to the bladerf project and combine with gnu radio to verify the accuracy of the addition? ![Confused :?](./images/smilies/icon_e_confused.gif)
![Confused :?](./images/smilies/icon_e_confused.gif)
-
- Posts: 156
- Joined: Thu Feb 28, 2013 11:14 pm
Re: FSK modulation and demodulation
Are you referring to bladeRF-fsk? It should be compiled and available as a command line utility called "bladeRF-fsk" when compiling libbladeRF and bladeRF-cli from source or from a binary OS package.
For documentation on bladeRF-fsk please take a look at https://github.com/Nuand/bladeRF/blob/m ... /README.md
For documentation on bladeRF-fsk please take a look at https://github.com/Nuand/bladeRF/blob/m ... /README.md
-
- Posts: 5
- Joined: Sat Oct 08, 2022 6:53 pm
Re: FSK modulation and demodulation
I want to add the following two files to FPGA image:
..bladeRF-master\hdl\fpga\ip\nuand\synthesis\fsk_modulator.vhd
..bladeRF-master\hdl\fpga\ip\nuand\synthesis\fsk_demodulator.vhd
..bladeRF-master\hdl\fpga\ip\nuand\synthesis\fsk_modulator.vhd
..bladeRF-master\hdl\fpga\ip\nuand\synthesis\fsk_demodulator.vhd
-
- Posts: 156
- Joined: Thu Feb 28, 2013 11:14 pm
Re: FSK modulation and demodulation
Please take a look at the at FSK testbench in hdl/fpga/ip/nuand/synthesis/tb/fsk_tb.vhd . Also, take a look at FSK bridge and QPSK_TX FPGA build revisions for the bladeRF 1.0 series.
-
- Posts: 3
- Joined: Wed Jan 24, 2024 12:07 am
Re: FSK modulation and demodulation
So helpful. Thank you.
coreball
coreball
-
- Posts: 3
- Joined: Tue Feb 20, 2024 10:27 am
Re: FSK modulation and demodulation
I having issues with bladeRF-fsk, if someone can please help.
I am following this github: https://github.com/Nuand/bladeRF/blob/m ... /README.md
the issue i am having is that when i do this command: bladeRF-fsk -r 924M -t 904M -i puppy.jpg
i am getting an error: sent: 0% ERROR: Transmission failed(no connection)
I have my blade connected to my laptop using USB and i have the antenna connected to TX
I dont know how this could be an issue of the laptop not recognizing the blade because when I do bladeRF-cli -p the device shows up.
To fix this problem I also tried modifying the command to: bladeRF-fsk -d <serial_number> -r 924M -t 904M -i puppy.jpg
but I still got the same error.
If someone can assist with this issue, I would greatly appreciate it.
I am following this github: https://github.com/Nuand/bladeRF/blob/m ... /README.md
the issue i am having is that when i do this command: bladeRF-fsk -r 924M -t 904M -i puppy.jpg
i am getting an error: sent: 0% ERROR: Transmission failed(no connection)
I have my blade connected to my laptop using USB and i have the antenna connected to TX
I dont know how this could be an issue of the laptop not recognizing the blade because when I do bladeRF-cli -p the device shows up.
To fix this problem I also tried modifying the command to: bladeRF-fsk -d <serial_number> -r 924M -t 904M -i puppy.jpg
but I still got the same error.
If someone can assist with this issue, I would greatly appreciate it.