Hello,
I would like to connect bladerf_sink_c.cc to my python code.
https://github.com/osmocom/gr-osmosdr/b ... _sink_c.cc
However, i don't know how to import the cc file in the python code.
I wrote "import osmosdr". But it doesn't work.
Does anyone know what modules I should import in order to use the bladerf_sink_c file?
Thank you.
How to import bladerf in python code
- rtucker
- Posts: 77
- Joined: Sun Jan 25, 2015 10:38 am
Re: How to import bladerf in python code
Greetings...
For a practical example, take a look at:
https://github.com/Nuand/bladeRF/blob/m ... deRF_rx.py
You will need to have a working GNU Radio installation to use gr-osmosdr. Many Linux distributions provide it through their package manager, or you can install it using GNU Radio's PyBOMBS system (https://github.com/gnuradio/pybombs). If you're using PyBOMBS, note that you may need to use "pybombs run" to ensure the environment is set up correctly when running your script.
For a practical example, take a look at:
https://github.com/Nuand/bladeRF/blob/m ... deRF_rx.py
You will need to have a working GNU Radio installation to use gr-osmosdr. Many Linux distributions provide it through their package manager, or you can install it using GNU Radio's PyBOMBS system (https://github.com/gnuradio/pybombs). If you're using PyBOMBS, note that you may need to use "pybombs run" to ensure the environment is set up correctly when running your script.
Rey Tucker (she/her)
Systems Engineer, Nuand LLC
Rochester, NY, USA
#WontBeErased
Systems Engineer, Nuand LLC
Rochester, NY, USA
#WontBeErased