Configuring bladeRF 2.0 micro xA4 using python
-
- Posts: 1
- Joined: Wed Apr 10, 2024 9:39 am
Configuring bladeRF 2.0 micro xA4 using python
Good day. I need to configure the bladeRF 2.0 micro xA4 to receive the 100 MHz band. I have installed the latest updates. Downloaded the FPGA firmware that supports 122.88MHz. But I don't understand how to use the bladerf library to transfer parameters bladerf=0,sample_format=8,feature=oversample to python. I think it is partly in the sync_config settings. But I don't understand how to enable oversample.
-
- Posts: 3
- Joined: Tue Jan 09, 2024 5:20 am
Re: Configuring bladeRF 2.0 micro xA4 using python
Check python example txrx for how to pass parameters and instantiate device using python