Off topic threads and discussions

Moderator: robert.ghilduta

Post Reply
Posts: 1
Joined: Tue Sep 24, 2019 9:46 am


Post by Kasey »


I recently built a QFH antenna for receiving NOAA weather satellites. I did some initial testing with my kenwood handheld and got a strong clear signal, however when I hooked the antenna up to my BladeRF it couldn't see anything.

I even turned up all the amplifiers and nada. Do I need to add an LNA to my antenna to get it to pick up anything? It seems like the sensitivity should be better.

Posts: 22
Joined: Fri Apr 14, 2017 10:12 am

Re: Discuss

Post by txjacob »

Are you using the older bladeRF or the newer bladeRF?
Post Reply