no need to panic while updated to firmware 2.0.0
Posted: Wed Jun 15, 2016 2:02 am
This is a share of experience for new pie:)
we can update firmware through:
https://github.com/Nuand/bladeRF/wiki/U ... F-firmware
If you update the firmware to 2.0.0, after the update finished, you may meet the condition as following:
Both bladeRF-cli under Ubuntu and Windows , cannot identify the bladeRF device.
such as:
BladeRF-cli -i
will response that: no device found...(blablaba.., which happens on me yestarday)
If this happen, DO NOT panic, DO NOT warry about it.
Just download the bladeRF-win-installer-2016.05-rc2-alpha2.exe and install it onto windows, restart machine.
the bladeRF-cli will identify bladerf. Now you can down-grade it back to 1.9.0 or other firmware version.
we can update firmware through:
https://github.com/Nuand/bladeRF/wiki/U ... F-firmware
If you update the firmware to 2.0.0, after the update finished, you may meet the condition as following:
Both bladeRF-cli under Ubuntu and Windows , cannot identify the bladeRF device.
such as:
BladeRF-cli -i
will response that: no device found...(blablaba.., which happens on me yestarday)
If this happen, DO NOT panic, DO NOT warry about it.
Just download the bladeRF-win-installer-2016.05-rc2-alpha2.exe and install it onto windows, restart machine.
the bladeRF-cli will identify bladerf. Now you can down-grade it back to 1.9.0 or other firmware version.