LTE Cell Scanner supports bladeRF now!

Working on something interesting? Share it with the community!
Post Reply
jxj
Posts: 2
Joined: Sat Jul 26, 2014 2:35 am

LTE Cell Scanner supports bladeRF now!

Post by jxj »

After LTE-Cell-Scanner (https://github.com/JiaoXianjun/LTE-Cell-Scanner) supports rtlsdr hackRF, now it supports bladeRF!

Here is part of README:

An OpenCL accelerated TDD/FDD LTE Scanner (from rtlsdr/hackRF/bladeRF A/D samples to PDSCH output and RRC SIB messages decoded). By Jiao Xianjun ([email protected]). Tech blog: http://sdr-x.github.io

New features, make and Usages:

0x00. basic method to build program

Code: Select all

        mkdir build
        cd build
        cmake ../
        make
CellSearch and LTE-Tracker program will be generated in build/src. Use "--help" when invoke program to see all options

0x01. cmake to build for different hadware

Code: Select all

        cmake ../ -DUSE_BLADERF=1   -- build for bladeRF
        cmake ../ -DUSE_HACKRF=1    -- build for hackRF
        cmake ../                   -- default for rtlsdr
...

See complete README here: https://github.com/JiaoXianjun/LTE-Cell-Scanner

See video outside China: http://youtu.be/rg6ENh-tbJY
aserkin
Posts: 1
Joined: Sun May 21, 2023 3:29 am

Re: LTE Cell Scanner supports bladeRF now!

Post by aserkin »

Hi
I tried to build the program for bladerf 2.0 micro xA4 - it builds fine but gives an error while running:

# CellSearch -s 1800000000
LTE CellSearch (release) beginning. 1.0 to 1.1.0: An enhanced LTE Cell Scanner/tracker. Xianjun Jiao ([email protected])
PPM: 0
correction: 1
init_board: 1 bladeRF devices found! The 1st one will be used:
Backend: libusb
Serial: 358164f60b114982a3fbf1864bbf59cd
USB Bus: 2
USB Address: 6
config_bladerf bladerf_get_lna_gain: Failed to get lna gain: Operation not supported
BLADERF device not FOUND!

What does it mean? How we can sort this out?

Thank you
robert.ghilduta
Posts: 156
Joined: Thu Feb 28, 2013 11:14 pm

Re: LTE Cell Scanner supports bladeRF now!

Post by robert.ghilduta »

bladerf_get_lna_gain() is a direct low level call to the bladeRF 1.0 . It is not needed for the bladeRF 2.0. You may just want to try commenting out that code, or using the unified gain API call bladerf_set_gain()
ISU
Posts: 1
Joined: Tue Oct 24, 2023 1:04 pm

Re: LTE Cell Scanner supports bladeRF now!

Post by ISU »

aserkin wrote: Thu May 25, 2023 3:51 am Hi
I tried to build the program for bladerf 2.0 micro xA4 - it builds fine but gives an error while running:

# CellSearch -s 1800000000
LTE CellSearch (release) beginning. 1.0 to 1.1.0: An enhanced LTE Cell Scanner/tracker. Xianjun Jiao ([email protected])
PPM: 0
correction: 1
init_board: 1 bladeRF devices found! The 1st one will be used:
Backend: libusb
Serial: 358164f60b114982a3fbf1864bbf59cd
USB Bus: 2
USB Address: 6
config_bladerf bladerf_get_lna_gain: Failed to get lna gain: Operation not supported
BLADERF device not FOUND!

What does it mean? How we can sort this out?

Thank you
Hi, same issue here.
Did you come out with a solution?
Janaka
Posts: 1
Joined: Sun Jan 07, 2024 3:37 am

Re: LTE Cell Scanner supports bladeRF now!

Post by Janaka »

Was able to fix it on Bladerf 2.0 micro xA9 by commenting/removing the below,

/**bladerf_lna_gain actual_lna_gain;
status = bladerf_get_lna_gain(dev, &actual_lna_gain);
if (status != 0) {
printf("config_bladerf bladerf_get_lna_gain: Failed to get lna gain: %s\n",
bladerf_strerror(status));
if (dev!=NULL) {bladerf_close(dev); dev = NULL; return(-1);}
}
char *lna_gain_str = NULL;
if (actual_lna_gain == BLADERF_LNA_GAIN_BYPASS) {
lna_gain_str = (char *)"BLADERF_LNA_GAIN_BYPASS";
} else if (actual_lna_gain == BLADERF_LNA_GAIN_MAX) {
lna_gain_str = (char *)"BLADERF_LNA_GAIN_MAX";
} else if (actual_lna_gain == BLADERF_LNA_GAIN_MID) {
lna_gain_str = (char *)"BLADERF_LNA_GAIN_MID";
} else if (actual_lna_gain == BLADERF_LNA_GAIN_UNKNOWN) {
lna_gain_str = (char *)"BLADERF_LNA_GAIN_UNKNOWN";
} else {
lna_gain_str = (char *)"INVALID_BLADERF_LNA_GAIN";
}**/



bladerf_gain_mode mode;
mode = BLADERF_GAIN_AUTOMATIC;
bladerf_channel channel = BLADERF_CHANNEL_RX(0);
status = bladerf_set_gain_mode(dev, channel, mode);
if (status < 0) {
printf("config_bladerf bladerf_set_gain: Failed to set bladerf gain automatic: %s\n",
bladerf_strerror(status));
}

/** int actual_vga1_gain;
status = bladerf_get_rxvga1(dev, &actual_vga1_gain);
if (status != 0) {
printf("config_bladerf bladerf_get_rxvga1: Failed to get rxvga1 gain: %s\n",
bladerf_strerror(status));
if (dev!=NULL) {bladerf_close(dev); dev = NULL; return(-1);}
}**/

/**
int actual_vga2_gain;
status = bladerf_get_rxvga2(dev, &actual_vga2_gain);
if (status != 0) {
printf("config_bladerf bladerf_get_rxvga2: Failed to get rxvga2 gain: %s\n",
bladerf_strerror(status));
if (dev!=NULL) {bladerf_close(dev); dev = NULL; return(-1);}
}**/

// int actual_total_vga_gain = actual_vga1_gain + actual_vga2_gain;


let me know if it works for you.
User avatar
Georgethush
Posts: 1
Joined: Mon Feb 05, 2024 6:07 am
Location: Russia
Contact:

Re: MBA Course in Chennai.

Post by Georgethush »

Is an MBA degree still relevant in today's rapidly changing business landscape, or is it becoming outdated and unnecessary?
ограничители опн https://energy-21.ru/katalog/opn/category/opn-330-kv опн 10 кв
Post Reply