Not DSP literate.
I need to OOK data at 2mb/sec to a sensor under GNURadio but I can't find information how to do this with bladeRF. My limited understanding is I/Q is to modulate a carrier, not OOK.
Pointers appreciated.
How to OOK Tx?
-
- Posts: 62
- Joined: Fri Mar 01, 2013 3:58 am
- Location: Silicon Valley
- Contact:
Re: How to OOK Tx?
I have an OOK flow graph that may be helpful. It's really a Morse code demo, but it should be a reasonable starting point.
http://www.w6rz.net/ook.grc
![Image](http://www.w6rz.net/ook.png)
Ron
http://www.w6rz.net/ook.grc
![Image](http://www.w6rz.net/ook.png)
Ron
-
- Posts: 455
- Joined: Thu Jun 06, 2013 8:15 pm
Re: How to OOK Tx?
I know I'm late to the party, but FWIW...
After re-writing the same code a couple times, I whipped up a quick little tool called OOKiedokie that currently supports the bladeRF. Feel free to shoot me feedback and PRs.
After re-writing the same code a couple times, I whipped up a quick little tool called OOKiedokie that currently supports the bladeRF. Feel free to shoot me feedback and PRs.