Using BT-100 in gqrx

Discussions related to schematic capture, PCB layout, signal integrity, and RF development
Post Reply
jleane
Posts: 1
Joined: Sat Oct 31, 2020 4:18 am

Using BT-100 in gqrx

Post by jleane »

Attempting to enable bias-tee in gqrx. Arguments "bladerf=0, biastee=rx" either does nothing (LED on BT-100 doesn't light) or crashes. "biastee=rx" doesn't enable it either. Any help? Using a bladeRF xA4 with the CLI version of gqrx on OSX.
robert.ghilduta
Posts: 156
Joined: Thu Feb 28, 2013 11:14 pm

Re: Using BT-100 in gqrx

Post by robert.ghilduta »

It seems like the space in the gr-osmosdr arguments before "biastee" might be causing an issue, have you tried removing it?
blupastu408w
Posts: 2
Joined: Thu Jul 14, 2022 1:24 pm

Re: Using BT-100 in gqrx

Post by blupastu408w »

bladerf=0,biastee=1
Post Reply