BladeRF micro ax9 - arbitrary signal amplification

Discussions related to schematic capture, PCB layout, signal integrity, and RF development
Post Reply
Naper
Posts: 2
Joined: Fri Sep 25, 2020 5:05 am

Re: BladeRF micro ax9 - arbitrary signal amplification

Post by Naper »

Hi,

Code: Select all

# Automatic gain control is enabled by default with libbladeRF 2.0.0 and later.
# If you wish to disable it and set gains manually:
#
# bladeRF> set agc off
source : https://github.com/Nuand/bladeRF/wiki/b ... and-Tricks

hope it helps.
Post Reply