Hello,
I am new to bladeRF / osmosdr. I am using gnuradio to set up a processing pipeline. I'd like to know what format of data comes out of the source block (i.e. int, float32 etc.).
Thank you in advance.
Ranga.
osmosdr + bladerf I/Q data format.
-
- Posts: 455
- Joined: Thu Jun 06, 2013 8:15 pm
Re: osmosdr + bladerf I/Q data format.
Hi there,
When using the gr-osmosdr Osmocom Sink and Osmocom Source blocks, you will be working with complex floats in the range [-1.0, 1.0]. I would recommend keeping things at a max of [-0.95, 0.95] when you can, just to avoid clipping.
Best regards,
Jon
When using the gr-osmosdr Osmocom Sink and Osmocom Source blocks, you will be working with complex floats in the range [-1.0, 1.0]. I would recommend keeping things at a max of [-0.95, 0.95] when you can, just to avoid clipping.
Best regards,
Jon
-
- Posts: 455
- Joined: Thu Jun 06, 2013 8:15 pm
Re: osmosdr + bladerf I/Q data format.
By the way - these examples might help you get started:
https://github.com/Nuand/bladeRF/tree/m ... s/gnuradio
https://github.com/Nuand/bladeRF/tree/m ... s/gnuradio