Nuand bladeRF NOT WORKING In LINUX

[claudedaniel]

Hello,
I'm having challenges on running my Nuand bladeRF (bladerf1) on Linux (kali). Works in windows. Not sure if this is related on library, dependencies or physical dependencies.

Please see info extracted from Windows CLI.

Code: Select all

bladeRF> info

  Board:                    Nuand bladeRF (bladerf1)
  Serial #:                 913e15a48381bd873c524aaa0167a35e
  VCTCXO DAC calibration:   0x90c1
  FPGA size:                40 KLE
  FPGA loaded:              yes
  Flash size:               32 Mbit
  USB bus:                  2
  USB address:              12
  USB speed:                Hi-Speed
  Backend:                  libusb
  Instance:                 0

bladeRF> version

  bladeRF-cli version:        1.9.0
  libbladeRF version:         2.5.0
  Firmware version:           2.4.0-git-a3d5c55f
  FPGA version:               0.14.0 (configured by USB host)

LINUX ISSUE:

Code: Select all

bladeRF-cli -i -v verbose

[VERBOSE @ host/libraries/libbladeRF/src/backend/usb/libusb.c:642] Using libusb version: 1.0.27.11882
[VERBOSE @ host/libraries/libbladeRF/src/backend/usb/libusb.c:519] Found a bladeRF (idx=0)
[DEBUG @ host/libraries/libbladeRF/src/backend/usb/libusb.c:189] Bus 001 Device 003: Nuand bladeRF, serial 913e15a48381bd873c524aaa0167a35e
[VERBOSE @ host/libraries/libbladeRF/src/backend/usb/libusb.c:581] USB port reset succeeded for bladeRF 913e15a48381bd873c524aaa0167a35e
[VERBOSE @ host/libraries/libbladeRF/src/backend/usb/usb.c:106] Changing to USB alt setting 0
[VERBOSE @ host/libraries/libbladeRF/src/board/bladerf1/bladerf1.c:851] Read Firmware version: 2.4.0-git-a3d5c55f
[VERBOSE @ host/libraries/libbladeRF/src/board/bladerf1/bladerf1.c:859] Capability mask before FPGA load: 0x0000007700000000
[DEBUG @ host/libraries/libbladeRF/src/backend/usb/libusb.c:864] Full speed connection is not suppored.
[DEBUG @ host/libraries/libbladeRF/src/board/bladerf1/bladerf1.c:899] Failed to get device speed: Operation not supported
Failed to open device (first available): Operation not supported

[andreaspeed]

You have something that touched the udev or non-generic kernel.

It works.