BladeRF Transmission Issue: Signal Not Received by Device
-
- Posts: 1
- Joined: Sun May 26, 2024 7:09 pm
BladeRF Transmission Issue: Signal Not Received by Device
I'm attempting to transmit a complex signal using my BladeRF micro and libbladeRF library. I've carefully constructed the waveform data in my Python script, but when I run the transmission,Wordle Unlimited I'm not observing the expected output on my receiving device. I'm eager to troubleshoot this issue and successfully transmit the desired signal using my BladeRF setup. Any assistance would be greatly appreciated!
-
- Posts: 1
- Joined: Tue Oct 01, 2024 11:51 pm
Re: BladeRF Transmission Issue: Signal Not Received by Device
It's possible you're encountering buffer underflow or overflow during transmission. Therefore, please check your Python script to ensure that you're handling buffers correctly.katebishop wrote: ↑Sun May 26, 2024 7:14 pm I'm attempting to transmit a complex signal using my BladeRF micro and libbladeRF library. I've carefully constructed the waveform data in my Python script, but when I run the transmission,geometry dash lite I'm not observing the expected output on my receiving device. I'm eager to troubleshoot this issue and successfully transmit the desired signal using my BladeRF setup. Any assistance would be greatly appreciated!