The XB-100 expansion board turns the bladeRF into an FPGA development board by breaking out all of the expansion header GPIO pins to LEDs, push buttons, and 0.1″ headers.
Out of stock
Join the waitlist to be emailed when this product becomes available
The XB-100 expansion board turns the bladeRF into an FPGA development board by providing access to all of the expansion header GPIO pins through LEDs, push buttons, and 0.1″ headers.
The expansion board adds:
8 bright (blue, green, red) LEDS
RBG LED
3 push buttons
4 switches
Six 10-position (2×3) 0.1″ headers
3.3V and 5V digital IO selection jumpers
Additional information
Weight
.2 lbs
Dimensions
3 × 3.25 × 1.25 in
Reviews
There are no reviews yet.
Be the first to review “GPIO expansion board” Cancel reply
The bladeRF x40 is a low-cost USB 3.0 Software Defined Radio. The 40KLE option makes the bladeRF the essential low-cost RF transceiver kit for both hobbyists, and RF enthusiasts.
The bladeRF x115 comes with a larger 115KLE Cyclone IV FPGA that provides additional room for hardware accelerators and signal processing chains including FFTs, Turbo Decoders, transmit modulators/filters, and receive acquisition correlators for burst modems.
All specifications subject to change at any time without notice. bladeRF is sold as test equipment and is expected for all intents and purposes to be used as such. Use of this device is at your own risk and discretion. Nuand LLC makes no warranty of any kind (whether express or implied) with regard to material presented on this page, and disclaims any and all warranties, including accuracy of this document, or the implied warranties of merchatability and fitness for use.
Reviews
There are no reviews yet.