Hello,
trying to verify basic functionality of a new bladeRF 2.0: for that we connected the same signal source to both rx1 and rx2 via the splitter. The obtained IQs are: RX1 = -1 * RX2 so the signal is shifted by 180 degrees. Could not find documentation related to this, is this result correct?.
Not a problem to introduce such correction in post-processing but we are concerned that something else may be wrong?
RX1 and RX2 are shifted by 180 degrees?
-
- Posts: 156
- Joined: Thu Feb 28, 2013 11:14 pm
Re: RX1 and RX2 are shifted by 180 degrees?
The behavior to invert RX2 should now be the default in commit 553335bb10428d . Please give it a try and let me know if you have any questions or concerns.