I first installed the BladeRF on a Win10 x64, using the bladeRF-win-installer-2016.05-rc2-alpha2 installer that's known to work on Win10.
It worked at once and I was able to use bladeRF-cli.
But then I would get
I don't know if it could be linked to the fact that I would also try to use the BladeRF in an Ubuntu virtual machine.bladeRF-cli -i -v verbose
[VERBOSE @ libusb.c:541] Using libusb version: 188.8.131.5205
[VERBOSE @ libusb.c:422] Found a bladeRF (idx=7)
[VERBOSE @ capabilities.c:45] Capability mask before FPGA load: 0x0000000700000000
[VERBOSE @ usb.c:112] Changing to USB alt setting 0
[VERBOSE @ usb.c:112] Changing to USB alt setting 1
[DEBUG @ nios_legacy_access.c:123] Failed to receive NIOS II response: Operation timed out
[DEBUG @ nios_legacy_access.c:213] Failed to read FPGA version: Operation timed out
Failed to open device (first available): Operation timed out
I would have to reinstall the driver using Zadig, unplug, replug, restart the PC, and maybe after some time I would be able to access the BladeRF again.
Any idea what could be the problem?